Goal Zero Boulder 100 Briefcase Solar Charging Kit

A solar charging system designed for maximum portability. The Boulder 100 Briefcase Solar Charging Kit comes with a pre-installed 10A Charge Controller to let you safetly and efficiently charge 12v batteries. The integrated kickstand means you can always find the best angle to get the most out of your panels.

To charge a Goal Zero Yeti Power Station with the Boulder 100 Solar Kit, you simply disconnect the High Power Port cable on the solar panel from the High Power Port cable on the charge controller and plug it into the High Power Port on the Yeti.

• 100 total Watts – two 50 Watt panels (14-21.5v) chained together and connected by a hinge.
• Built with strong tempered glass and an aluminum frame with added corner protection.

Specs

• Weight: 28.25 lbs (12.8kg)
• Dimensions (folded): 26.75 x 21.75 x 3.75 in (70 x 55.2 x 8.9 cm)
• Dimensions (unfolded): 26.75 x 43.5 x 1.75 in (70 x 110.4 x 4.4 cm)
• Spade to 8mm cable: 3Ft
• Spade to SAE cable: 15FT
• SAE to Ring cable: 23in
• SAE to Alligator: 29in
• Warranty: 24 Months

10 Amp Controller

• Designed to monitor and regulate solar input for 12V batteries.
• Equipped with an IP65 rating, the charge controller is weather resistant and dustproof, allowing for protection against the elements when powering off-grid adventures or outdoor equipment.
• Charge Controller comes with an integrated 8mm Goal Zero solar connector.

In The Box

• Boulder 100 Solar Panel Briefcase with cord and built-in kickstand
• Canvas Carrying Bag
• 10 Amp Charge Controller
• Boulder Charge Controller Mounting Bracket
• Spade to 8mm Cable
• Spade to SAE Cable
• SAE to Ring Terminal
• SAE to Alligator Clip